She’s currently in the “I can do it myself Mommy!” phase and insists on  dressing herself. She’s still getting the hang of shirts and pants but has mastered hats. The cute thing is she puts them on without caring where the brim is and most of the time it ends up on the side or back. Which makes her look even more like a fashionista.

Last week I whipped up a basic crochet hat without a brim.

While it looks cute itself I wanted to sass it up a bit and decided to add a little butterfly applique.

I think it gives it a finishing touch. The great thing about the applique is that it could be changed out pretty easily making an old hat turn into a new(ish) hat!

It was fun trying out different designs. I used a silver sharpie on the dark pink candle, the light pink has flowers and the red candle is random sparkles.

It was two easy steps!

1. get yourself some candles and jewels (from the beads section of the craft store).

2. glue on the jewels either randomly on the candle or in a design.

It did take a lot longer then I anticipated because I couldn’t find any glue in the house. The glue stick failed miserably, the rubber cement I had was almost dried up, the super glue wouldn’t even come out of the bottle. In the end I was able to find some Elmers glue that worked perfectly.

Note: I have not lit the candles yet to see how well the jewels hold up to the heat and when it’s burned down.

This is a personalized piece by creating my name using the alphabet instructions. Great for a baby’s room! The possibilities are endless though with origami-club.com’s great diagram or animated instructions. You could make flowers or animals or even landscapes.

How to make it?

The frame is a 6 3/4 x 4 3/4 from Ikea. The letters were made from 2 x 2 squares. After making the letters I taped them to the background to hold them in place and put the frame back togehter.

This was a last minute addition to my little girls birthday decorations. It didn’t even occur to me to have a birthday hat for her until the afternoon of her birthday. Luckily I had everything on hand to whip one up!

Here’s the lowdown:

1. Cut a half circle out of 12×12 cardstock. The half circles radius should be at least 6 inches.

2. Roll into a cone and mark the front center and where the edge overlaps.

3. Use a pencil to write/draw a message on the front where you marked the center. In my case I made a big 1 and BIRTHDAY underneath. I added a little glitter to the number to make it stand out.

4. While waiting for the glitter to dry, make the topping ribbons. Two types of ribbon in various colors will add a lot of interest to the hat. Cut about 6 strips into 4 inch lengths. Tie in the middle and then tape the tails to the inside center so that it will stick out of the point.

5. Use glue or double sided tape to hold the hat together. Place a heavy object inside the hat, with the glue/taped side down to secure.

6. Punch two holes on the sides for securing the hat on the wearer. I used ribbon but think elastic would have been a better choice.  Attach the string through the holes.

7. Using double sided tape, tape a 1/2 inch width ribbon to the rim of the hat.

These would make great New Years Eve hats too!

While I already knew how to wrap gifts (my mom use to make my sister and I do all the holiday gift wrapping!) I did learn a few great tips to make the gift look spectacular. With the upcoming holidays here are some tips to make your presents pop:

Instead of taping the paper closed in the middle of the bottom of the box, tape it to the edge. Its one step to fold the paper over and tape.

Then after wrapping the gift define the edges by running pinched fingers along the sides. This gives the gifted a “finished” look.

A little ribbon goes a long way! Make a bow first and then tie it on with a second piece. By making the bow first you don’t have to wrestle with the ends to make them face the right way. Ribbon with wire works best since you can shape it and “curl” the tails.

The color theme came about when I was making the invitations. I turned to scrapblog.com to create it because I knew it would give me the stickers I needed and the freedom to create the invitation I envisioned. Scrapblog offers printing but I had some cardstock already and decided to print the invitations at home.

After that it all came together….

From top to bottom:

The “happy 1st birthday” banner was  home-made using scrapbook paper, cardstock, and paper string. Look for a tutorial in our craft tip of the week soon!

The scrapbook pages were displayed on a wall and featured a lot of our baby’s firsts and milestones.

I wanted to share with our guests the monthly photos I took so that they could see how much she had changed. Each month had two photos tied together with ribbon and pinned up with a clothespin decorated with flower punch-outs.

No party is complete without a birthday hat! There will also be a tutorial for this in the craft tip of the week soon as well.

We started the party in the birthday shirt and tutu, which were a huge hit. The front is our little one’s first initial with a little crown – for being the little princess! The back of the shirt says, “I’m one!” with a large one underneath. The onesie was made using photoshop and iron-on sheets. The tutu was bought from Trinity’s Tutus on Etsy.

It was a lot of fun making many of the decorations and celebrating our little one’s first birthday with family and friends. I think she really enjoyed it too!

Supplies

• Metal rings – I get the ones in the embroidery section at Michaels. They come in sets of 2.
• 3-hole punch – or any type of whole punch. The 3-hole works great because it will punch both holes at the same time and I don’t have to measure.
• Greeting cards

Instructions

Just punch the holes in the card and slip them onto the rings.

Tips

• align the hole punch at the bottom of the card so that the bottom align.
• use cardstock to divide events if you put multiple events into one “book”

These also would be great for parties as place cards (minus the ribbon) or as rewards or even decoration.

1. Cut a 7/8″ strip from the 11″ side of a piece of paper.

2. Fold the paper accordion style. Make each fold about 3/4″

3. Overlap and glue or tape the ends together to form a circle. I used double sided tape. The circle won’t lie flat and the next step will fix it.

4. Cut out two circles – one 1 3/4″ in diameter, one 1 7/8″ in diameter.

5. Glue the larger circle to the back side. Place something on top to flatten (I used the rubber cement glue bottle). Wait for the glue to dry.

6. Write a message on the smaller circle before gluing it to the front. Place something on top to flatten. Wait for glue to dry.

7. For the ribbons, cut out two strips of paper 3.5″ long and 1/5″ wide. Glue to the backside. Cut the ends to form an upside-down V.

8. Adhere a pin or string to the back for wearing.

To give them a new look I cut scrapbook paper to size and tucked it in the bind. Rather then trying to remember which color binder was which I stamped the words “PATTERNS – ADULT” and “PATTERNS – BABY” on white paper and glued it on.

Now they’re also a decorative piece on our bookshelf!

A hint for sliding in the bind- open the folder flat to give yourself more room. You can’t see it from the pic but one of them got a little bit bent while I was putting it in!

These are the basic steps if you already have decorative paper:

Step 1: Select your paper.

Step 2: Open the calendar file.

Step 3: Load the paper into your printer. Make sure the pretty side is what will be printed on.

Step 4: Print!

If you don’t have any decorative paper- no worries! You can do what I did for the calendar in the image. I went to Canon’s Creative Park. They have free download-able scrap booking backgrounds, borders, stickers, and letters.

For October I wanted something halloween-ish and found this one with spiderwebs. I printed the paper first and then followed steps 2-4. I used Microsoft Word to print the calendar and moved it to the bottom right for aesthetics (I like white space! Plus it gives me room to add notes.)